Articles

EAS Finger Board II is our latest version of our 68HC11 based mini controller board

I had an entire week off from work and decide to start on my 80/20

This is our version of the AVR microcontrolled UHU servo board designed by Uli Uber.

At the local tool store, a 1/2″ x 10TPI acme tap was $40. The cost

This board is a optoisolated parallel port breakout board that will make it easier to

Our various CNC and metalworking pages. Micro-Mill CNC conversion 4th axis rotary planetary gear head

The EtherBoard is a add on 10base-T Ethernet interface for our 68HC11 controller. The board features

EAS MicrostepPLD is our 2 axis microstepping chopper driver board for stepper motors. It is

7×12 Mini Lathe conversion to CNC. Updated July 8, 2014. Made Hackaday.com! This is our

MiniDaq is an 8 channel, 12bit analog to digital acquisition board for the IBM PC,

Ceramic knives will eventually worn out and would need some sharpening. So one must at

Sharpening your straight edge razors need not be a chore once you have read this